Altimate Medical is one of the most preferred manufacturers making the rehabilitation products with EasyStand brand catering to the people with disabilities. With their latest technology, EasyStand has contributed to make the life of adults and children with ailments easier and better. Zing is one of the product categories of EasyStand that is useful for the children facing disability in the lower limbs. Adjustable design and multi-positioning system make zing standers one of the most versatile standing equipment. With its carefully engineered design, it offers the facility to adjust the base on three different positions, ensuring maximum patient convenience.
Fits individuals from 40-60″ and up to 154 lbs.
The Zing MPS is the only multi-position stander that pivots two directions, allowing the unit to go from flat-to-load supine to 20 degrees prone in one motion. There is no need to transfer the user in and out, flip pads, foot plates and trays. This ability provides a therapeutic opportunity not possible with other standing frames. It is also one of the few standers that provides the option of up to 30 degrees of independent leg abduction.
E0641: Standing frame/table system, multi-position (e.g. three-way stander), any size including pediatric, with or without wheels
The Zing MPS Size 2 is a larger version of the Zing MPS size 1. The Zing MPS provides a new therapeutic opportunity to stand in supine, upright and prone without having to transfer the child in and out of the stander to switch between supine or prone standing. No need to flip pads, foot plates and trays to change positions. Tool-free adjustments and/or removal of support and positioning components adds to the ease of use.
30 degrees of independent leg abduction (60 degrees bilaterally)
A simple knob allows the entire leg to abduct up to 30 degrees, no need to re-adjust the foot plates or knee pads.
Unique Lift Mechanisms
The base unit is equipped with a prone position lockout to prevent inadvertently going past vertical. A gas spring lift lockout is available to prevent any inadvertent position changes which can be useful if other children are present during standing sessions. The Dual Control enables position changes by foot pedal or hand control.
Swing-away Tray
Multi-adjustable tray can swing either direction while remaining attached to the unit or it can be removed completely. This tray, when swung away but attached on one side of the stander, is close and well within reach once a transfer has been completed. The transfer height of the Zing MPS size 2 is a comfortable 31? from the floor surface.
Remarkably Modular
With 75 support and positioning components/accessories, it can be configured as a simple stander or fit a child with more complex needs. The support and positioning components available (independent and multi-adjustable foot plates, knee pads, calf pads and floating hip guides) make the Zing MPS one of the few multi-position standers that can accommodate contractures on one or both sides.
Trust Rehabcart: The Rehab Equipment Specialists
Rehabcart is trusted by private, public & state-owned healthcare facilities for 100% genuine medical-grade devices. Expect only the best rehab care supplies, including many FDA, approved & CE certified rehabilitation equipment & accessories sourced from globally trusted manufacturers. Click here to explore more from RehabCart.
The minimum support package includes: (no substitutions)
Mast with Leg Abduction, Dual Control, Gas Spring Lift Lockout, Directional Locking Caster, Multi-Adjustable Foot Plates, Secure Foot Straps, Multi-Adjustable Knee Pads, Knee Strap, Planar Pelvic Pad, Hip Supports, Padded Positioning Strap (2), Hygienic Covers for (Planar Pelvic Pad, Planar Upper Body Pad, Lateral Supports, Face Aperture), Planar Upper Body Pad, Lateral Supports, Face Aperture, Multi-Adjustable Clear Tray, Forearm Wings, Hand Grips, Push Handle for Tray, Tool Pouch, Swivel Locking Casters, Foot Operated Gas Spring, Mast Receiver.
| Basic Unit | Imperial | Metric |
| Height Range | 40″- 60″ | 102 cm- 152 cm |
| User Weight Limit | 154 lbs. | 70 kg |
| Transfer Height( Horizontal Position ) | 31″ | 79 cm |
| Center of Hip to Footplate Range, Maximum, may invert footplates as necessary | 34″ | 86 cm |
| Upper Body Support, Vertical Adjustment Range (7 settings) | 6″ | 15 cm |
| Approximate Equipment Weight of basic unit, in a minimally equipped usable configuration, less most options | 82 lbs. | 37 kg |
| Approximate Equipment Maximum Weight, Fully optioned unit | 145 lbs. | 66 kg |
| Frame footprint, Caster-to-caster | 26.75″ x 39.75″ | 68 x 101 cm |
| Maximum Dimensions | 28.75″ x 41.75″ | 73 x 106 cm |
| Upholstery | Black nylon/ Neoprene or Molded Urethane | |
| Hygienic Covers | Polyurethane Laminate ECO-PUL Multiple Patterns Available, see literature or website | |
| Frame color | Green, Purple, Orange, or White, Medium Gloss Polyester Powder Coat | |
| Casters and Wheels | 3″ diameter | 8cm diameter |
| Lifting Mechanisms Available | Gas Spring Pow’r Up (Electric) | |
| Lift Options, if equipped with Gas Spring | Dual Control (hand lever) Lockout Knob | |
| Options and Accessories | ||
| Supine positioning/“Prone-Forward” positioning. Supine, MPS, TT | Supine 0-90 degrees/ Prone 0 to 20 degrees forward | |
| Positioning, Prone Model | 90 (vertical) to 0 (horizontal) | |
| Leg Abduction | Up to 30 degrees per side | |
| Feet | ||
| Foot straps – length over arch | 10″ 15″ 21″ | 25 cm 38 cm 53 cm |
| Secure Foot straps – length over arch | Available in same lengths as regular foot straps | |
| Footplate Options L x W | 7.75″ x 3.25″ 9.75″ x 4″ 11.75″ x 5″ | 20 x 8 cm 25 x 10 cm 30 x 13 cm |
| Footplate, platform style | 11.5″ L x 16.75″ W | 29 x 43 cm |
| Multi-Adjustable footplates – Plantar/Dorsi | +/- 20 degrees | +/- 20 degrees |
| Multi-Adjustable footplates – Fore/Aft | +/- 0.75″ | +/- 2 cm |
| Multi-Adjustable footplates rotation | 30 degrees left/right | 30 degrees left/right |
| Knees | ||
| One-piece Calf Pad / Leg Rest | 17.5″ x 5.5″ | 44 x 14 cm |
| One-piece Calf Pad Strap, Fits Approximate circumference | 28″ – 38″ | 71 – 97 cm |
| Kneepad Depth Range (from seat plane) | From tight against plane to +7″ | Tight to +18 cm |
| Kneepad Options, Inside Width | 3.25″ 4.25″ 5″ | 8 cm 11 cm 13 cm |
| Kneepad Dimensions (Height x Outside Width) | ||
| 3.25 4.25 5 | 4″ x 4″ 4.5″ x 5″ 5″ x 6″ | 10 x 10 cm 11 x 13 cm 13 x 15 cm |
| Multi-Adjustable Kneepads Width Range | From tight together to 17.25″ outside-to-outside | Tight to 44 cm |
| Multi-Adjustable Kneepads Height Range | Infinite from footplate to pelvic pad | |
| Calf (Behind knee) Pad Option | ||
| 4.5″ 5.5″ Fore/Aft Adjustment from seat plane | 4.5 x 4.5″ 5.5 x 5.5″ +3″ / -2″ | 11.5 x 11.5 cm 14 x 14 cm +8 cm / -5 cm |
| Independent Planar Leg (Calf) Support Tilt Table (TT) Pads | ||
| 3 sizes | 9″ H x 7.5″ W 12″ H x 7.5″ W 15″ H x 7.5″ W | 23 x 19 cm 30 x 19 cm 38 x 19 cm |
| Independent Planar Leg (Calf) Support Tilt Table (TT) Pad Strap. | 19″ | 48 cm |
| Fits approximate circumference: | ||
| Table / Tray | Posterior Support Models (Supine, MPS, TT) | |
| Shadow Tray size Molded/Acrylic | 21″ x 24″ | 53 x 61 cm |
| Basic Shadow Tray Height Range, referenced from hip pivot: | +4″ – +7″ | +10 – +18 cm |
| Basic Shadow Tray Fore/Aft range (from posterior pad to chest pad) | 0.5″ – 12.5″ | 1 – 32 cm |
| Note: Form-to-Fit Upper Body Supports, Lateral Configuration, and Tray Elbow Pads may reduce tray ranges or introduce interferences. A demo or fitting is always recommended when specifying a highly configured product. | ||
| Swing Away Tray Height Range, referenced from hip pivot: | +4″ – 7″ | +10 cm – +18 cm |
| Swing Away Tray Fore/Aft Range (from posterior pad to chest pad) | 4″ – 16″ | 10 – 41 cm |
| Swing Away Tray Angle Adjust Range | -90 to +90 Degrees | |
| Chest Pad, Tray Mounted | 3″ H x 8″ W | 8 cm x 20 cm |
| Elbow (Cutout) Tray Pads | ||
| – Inside Width | 9.25″ 11″ 13″ | 23 cm 28 cm 33 cm |
| Upholstery/ Positioning Options/ Specs | ||
| Hip Supports | ||
| Hip support pad size | 4.5″ x 4″ | 11cm x 10cm |
| Hip supports width range | 7″ – 13″ | 18 – 33 cm |
| 2 sizes | 12″ x 18″ | 30 – 46 cm |
| Hip Support, TT, Width Range | 10″ – 16″ | 25 to 41 cm |
| Lateral Supports | ||
| Lateral support pad size | 4″ x 6″ | 10 – 15 cm |
| Lateral supports width range, Supine & MPS – 2 sizes (4″ of adjustment. | 7” to 11” (11” pad) | 18 to 28 cm (11” pad) |
| Ranges vary based on pad width) | 10″ – 14″ (11″ pad) | 25 – 36 cm (11″ pad) |
| – 11″ wide upper body pad | 9″ – 13″ (13″ pad) | 23 – 33 cm (13″ pad) |
| – 13″ wide upper body pad | 12″ – 16″ (13″ pad) | 30 – 41 cm (13″ pad) |
| Lateral Supports w/Elbow Stops and/or Arm Rests, Supine and MPS Only. | ||
| Width Range including optional pad holes | 10″ – 17″ 12″ – 19″ | 25 – 43 cm 30 – 48 cm |
| w/ 11″ Wide Pad | ||
| w 13″ Wide Pad | ||
| Lateral supports, TT, width range | 10″ – 16″ | 25 – 41 cm |
| Lateral supports, Prone, width range | ||
| – 7″ wide upper body pads | 7 – 12″ | 18 – 30 cm |
| – 9″ wide upper body pads | 9″ – 14″ | 23 – 36 cm |
| Lateral supports height range | 4″ 8″ by swapping L/R | 10 cm 20 cm |
| Lateral supports Fore/Aft Range | 1″ | 3 cm |
| Trunk and Torso Pads | ||
| Pelvic Support, Planar and Form-to-Fit | 10″ H x 11″ W | 25 x 28 cm |
| (2 sizes each) | 10″ H x 13″ W | 25 x 33 cm |
| Supine / MPS | ||
| Main Support Pad, TT, Planar | ||
| (3 sizes) | 19″ H x 16″ W 22″ W x 16″ W 25″ W x 16″ W | 48 x 41 cm 56 x 41 cm 64 x 41 cm |
| Upper Body Support, Planar and Form-to-Fit | ||
| (2 sizes each) | 8″ H x11″ W 8″ W x 13″ W | 20 x 28 cm 20 x 33 cm |
| Supine / MPS | ||
| Prone Pelvic Anterior Support | ||
| Planar | 5″ H x 7″ W 5″H x 9″W 7″H x 7″ W 7″H x 9″W 5″H x 12″W 7″H x 12″W 10″H x 13″W | 13 x 18 cm 13 x 23 cm 18 x 18 cm 18 x 23 cm 13 x 30 cm 15 x 33 cm 18 x 30 cm 25 x 33 cm |
| Form-to-Fit | ||
| Positioning/Chest Strap (pad size) | 6″ x 10″ | 15 x 25 cm |
| Positioning Strap and Chest Strap Options |
Catalog Number | Base Component | Actual Capacity | |
| Inches | cm | ||
PA3011 | A3011 | 29 | 74 |
| PT30066 | T30066 | 35 | 89 |
| PA5610 | A3011 | 29 | 74 |
| PB5542 | T30066 | 35 | 89 |
| PA3062 | A3062 | 45 | 114 |
| PB3052 | B3052 | 57 | 145 |
| PB5592 | A3062 | 45 | 114 |
| PB5594 | B3052 | 57 | 145 |
| PB5596 | A3062 | 45 | 114 |
| PB5598 | B3052 | 57 | 145 |
| Chest vest – X-Style | 11″ L x 9.5″ W | 28 x 24 cm |
| – X-Style | 14.5″ L x 10.5″ W | 37 x 27 cm |
| -Y Style Vest | 17.5″ L x 11.5″ W | 44 x 29 cm |
| -Y Style Vest | 20.5″ L x 12.5″ W | 52 x 32 cm |
| Posterior Head Support | ||
| Head support height range. (From top of upper body pad.) | 1″ to 10″ | 2.5 to 25 cm |
| Head support depth range – from backrest | -3.5″ to +1″ | -9 to + 2.5 cm |
| Head Support Options | 5″ H x 8″ W 6″ H x 10″ W 7″ H x 14″ W | 13 x 20 cm 15 x 25 cm 18 x 36 cm |
| Form-to-Fit Head Support | ||
| Height | 5″ | 13 cm |
| Width, variable up to approximately: | 10″ | 25 cm |
| TT Planar Head Support | 9″ H x 10″ W | 23 x 25 cm |
| Anterior Head Support (Face Prompt) | ||
| Prone Model Only. 2 pads. Pad Size. | 3″ W x 9″ H | 8 x 23 cm |
| Configurations Available: | ||
| Supine (posterior support surfaces) | ||
| MPS (Multi-positional Stander, w/Prone Forward optional feature, posterior support surfaces) | ||
| TT (Tilt Table, larger posterior upholstery surfaces) | ||
| Prone (anterior support surfaces) |
Catalogs & Manuals
Zing Catalog Zing Mini-Catalog Manual
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.