Skip to navigation Skip to contentBalance Therapy, Gait Trainers, Mobility Aids, Occupational Therapy, Physiotherapy / Kinesitherapy Solutions, Professional Standers and Standing & Stepping Frames, Rehabilitation Therapy, Standers and Standing & Stepping Frames, Stepping / Skating and Stepping, Stepping / Skating and SteppingRifton K610 Mini Pacer Gait Trainer for Disabled Child, Gait Training Device
- K610 Mini Pacer -Used for:
- Disabled child who learn to walk
- Child lacking active use of trunk and leg muscles
- For users with elbow height: 15-1/2 in. -20-1/2 in. (39-52 cm)
- Bears the maximum load of 50lbs (23kg)
- Height can be adjusted according to child by raising or lowering the prompts
- Swivel locks to prevent the device from unwanted rolling
- Locking all casters will allow movement only in straight line
- Equipped with Caster Brakes that completely stops the rotation of wheel
- Caster Drag feature resists the fast or sudden movement of the device
- The Pacer for disabled child is equipped with directional lock that allows the caster to move in one direction only, it prevents unwanted movement
- You can attach the accessories to this Gait Training Equipment by using clamps and posts
- The accessories to be used on the frame Pacer Equipment are:
- Hand Loop -to the forward of main frame uprights
- Arm Prompts – on the main frame to avoid injury and tipping
- Chest Prompt- behind the main frame uprights
- Hip Positioner- near back of the top bar, it encourages forward leaning
- Pelvic Support- near the back of top bar, it provides weight bearing assist
- Thigh Prompts- behind the chest prompt on top bar
- Ankle Prompts- insert into slots at the bottom of pacer frame tubes
- Tray- at the center of front of top bar
- Attendant Guide Bar- at the front of top bar
- After attaching required accessories, the Pacer can be adjusted either in anterior or posterior position
- The Gait Pacer can be cleaned with disinfectant wipes or solution of up to 10 percent bleach
- Mini Gait Pacer is equipped with multiple accessories. The dimension of the Gait Pacer are:
- Overall Width: 20-1/2 inches (52 cm)
- Overall Length: 22-1/2 inches (57 cm)
- Chest Prompt Height (top edge): (17-1/2 – 22-1/2) inches
- Frame Height: 12-1/2 inches
- Frame Weight: 7-1/2 lbs. (3 kg)
- Chest Prompt Circumference: 14-28 inches
SKU: K610
Balance Therapy, Gait Trainers, Mobility Aids, Occupational Therapy, Physiotherapy / Kinesitherapy Solutions, Professional Standers and Standing & Stepping Frames, Rehabilitation Therapy, Standers and Standing & Stepping Frames, Stepping / Skating and Stepping, Stepping / Skating and SteppingRifton K620 Small Pacer Gait Trainer for Disabled Child, Gait Training Device
- K620 Small Pacer -Used for:
- Disabled child who learn to walk
- Child lacking active use of trunk and leg muscles
- For users with elbow height: 18-1/2 in. -27-1/2 in. (47-70 cm)
- Bears the maximum load of 75lbs (34kg)
- Height can be adjusted by pulling the triggers up and slide the top bar to desired position
- Swivel locks to prevent the device from unwanted rolling
- Locking all casters will allow movement only in straight line
- Equipped with Caster Brakes that completely stops the rotation of wheel
- Caster Drag feature resists the fast or sudden movement of the device
- The Gait training Pacer is equipped with directional lock that allows the caster to move in one direction only, it prevents unwanted movement
- You can attach the accessories to this Gait Training Equipment by using clamps and posts
- The accessories to be used on the frame Pacer Equipment are:
- Hand Loop -to the forward of main frame uprights
- Arm Prompts – on the main frame to avoid injury and tipping
- Chest Prompt- behind the main frame uprights
- Hip Positioner- near back of the top bar, it encourages forward leaning
- Pelvic Support- near the back of top bar, it provides weight bearing assist
- Thigh Prompts- behind the chest prompt on top bar
- Ankle Prompts- insert into slots at the bottom of pacer frame tubes
- Tray- at the center of front of top bar
- Attendant Guide Bar- at the front of top bar
- After attaching required accessories, used can be positioned in the Pacer either in anterior or posterior position
- The Gait Pacer can be cleaned with disinfectant wipes or solution of up to 10 percent bleach
- Small Gait Pacer is equipped with multiple accessories. The dimension of the Gait Pacer are:
- Overall Width: 22-1/2 inches (57 cm)
- Overall Length: 27 inches (69 cm)
- Chest Prompt Height (top edge): (22 -30-1/2) inches
- Frame Height: (15-1/2 -19-1/2) inches
- Frame Weight: 10-1/2 lbs. (5 kg)
- Chest Prompt Circumference: 14-28 inches
SKU: K620
Balance Therapy, Gait Trainers, Mobility Aids, Occupational Therapy, Physiotherapy / Kinesitherapy Solutions, Professional Standers and Standing & Stepping Frames, Rehabilitation Therapy, Standers and Standing & Stepping Frames, Stepping / Skating and Stepping, Stepping / Skating and SteppingRifton K630 Medium Pacer Gait Trainer for Disabled Person, Gait Training Device
- Medium Pacer -Used for:
- A disabled client who learn to walk
- A person lacking active use of trunk and leg muscles
- For users with elbow height: 24-35 inches (61-89 cm).
- Bears the maximum load of 150lbs (68kg)
- Height of upper frame can be adjusted
- Turning the screw on upper frame increases default force range of dynamic weight bearing system
- Standard base has 4 casters of 5-1/2 inches each and every caster has a brake, swivel lock, and directional lock
- The utility base has two casters of 8 inches each and two 11-1/2 inches rear wheels. They have brakes, directional lock and drag functions
- Because of the wide, height adjustable treadmill base, it can be used on a treadmill
- You can attach the accessories to this Gait Training Equipment by using clamps and posts
- The accessories to be used on the frame Pacer Equipment are:
- Odometer- displays distance travelled
- Hand Loop -can be attached forward of frame cross bar
- Arm Prompts -can be attached forward of the frame cross bar
- Chest Prompt- attach behind the frame cross bar
- Hip Positioner- attach it away from the end of the top bar. It encourages forward leaning
- Pelvic Support- attach a little bit away from the end of the top bar, it provides weight bearing assist
- Thigh Prompts- behind the chest prompt on the top bar
- Ankle Prompts- can be used on utility base and standard base both
- Tray- attach it to the pacer with a clamp
- Multi Positioning Saddle- attach under the upper frame.
- Guide Bar- attach it to any side of center section on the base frame
- After attaching required accessories, used can be positioned in the Pacer either in an anterior or posterior position
- Steel hardware items are zinc or nickel plated or stainless steel
- The dimension of the Medium Gait Pacer are:
- Overall Width (Standard Base): 26 inches (66 cm)
- Overall Length (Standard Base): 30 inches (76 cm)
- Frame Height: 21-1/2 to 27 inches (Standard and Utility)
- Frame Weight: 15 lbs (6.8 kg)
SKU: K630
Balance Therapy, Gait Trainers, Mobility Aids, Occupational Therapy, Physiotherapy / Kinesitherapy Solutions, Professional Standers and Standing & Stepping Frames, Rehabilitation Therapy, Standers and Standing & Stepping Frames, Stepping / Skating and Stepping, Stepping / Skating and SteppingRifton K640 Large Pacer Gait Trainer for Disabled Person, Gait Training Device
- Large Pacer -Used for:
- A disabled client who learn to walk
- A person lacking active use of trunk and leg muscles
- For users with elbow height: 32-47 inches (81-119 cm)
- Bears the maximum load of 200lbs (91kg)
- Height of upper frame can be adjusted
- Turning the screw on upper frame increases default force range of dynamic weight bearing system
- Standard base has 4 casters of 5-1/2 inches each and every caster has a brake, swivel lock, and directional lock
- The utility base has two casters of 8 inches each and two 11-1/2 inches rear wheels. They have brakes, directional lock and drag functions
- Because of the wide, height adjustable treadmill base, it can be used on the treadmill
- You can attach the accessories to this Gait Training Equipment by using clamps and posts
- The accessories to be used on the frame Pacer Equipment are:
- Odometer- displays distance travelled
- Hand Loop -can be attached forward of the frame cross bar
- Arm Prompts -can be attached forward of the frame cross bar
- Chest Prompt- attach behind the frame cross bar
- Hip Positioner- attach it away from the end of the top bar. It encourages forward leaning
- Pelvic Support- attach a little bit away from the end of the top bar, it provides weight bearing assist
- Thigh Prompts- behind the chest prompt on the top bar
- Ankle Prompts- can be used on utility base and standard base both
- Tray- attach it to the pacer with a clamp
- Multi Positioning Saddle- attach under the upper frame.
- Guide Bar- attach it to any side of center section on the base frame
- After attaching required accessories, used can be positioned in the Pacer either in an anterior or posterior position
- The Gait Pacer can be cleaned with disinfectant wipes or solution of up to 10 percent bleach
- Steel hardware items are zinc or nickel plated or stainless steel
- The dimension of the Large Gait Pacer are:
- Overall Width (Standard Base): 28 inches (71 cm)
- Overall Length (Standard Base): 36 inches (91 cm)
- Frame Height: 28-1/2 to 38-1/2 inches (Standard and Utility)
- Frame Weight: 15-1/2 lbs (7 kg)
SKU: K640
Balance Therapy, Gait Trainers, Mobility Aids, Occupational Therapy, Physiotherapy / Kinesitherapy Solutions, Professional Standers and Standing & Stepping Frames, Rehabilitation Therapy, Standers and Standing & Stepping Frames, Stepping / Skating and Stepping, Stepping / Skating and SteppingRifton K650 Extra Large Pacer Gait Trainer for Disabled Person, Gait Training Device
- Extra Large Pacer -Used for:
- A disabled client who learn to walk
- A person lacking active use of trunk and leg muscles
- For users with elbow height: 34-49 inches (86-124 cm)
- Bears the maximum load of 250lbs (113kg)
- Height of upper frame can be adjusted
- Turning the screw on upper frame increases default force range of dynamic weight bearing system
- Standard base has 4 casters of 5-1/2 inches each and every caster has a brake, swivel lock, and directional lock
- The utility base has two casters of 8 inches each and two 11-1/2 inches rear wheels. They have brakes, directional lock and drag functions
- Because of the wide, height adjustable treadmill base, it can be used on the treadmill
- You can attach the accessories to this Gait Training Equipment by using clamps and posts
- The accessories to be used on the frame Pacer Equipment are:
- Odometer- displays distance travelled
- Hand Loop -can be attached to the forward of the frame cross bar
- Arm Prompts -can be attached on the forward of the frame cross bar
- Chest Prompt- attach behind the frame cross bar
- Hip Positioner- attach it away from the end of the top bar. It encourages forward leaning
- Pelvic Support- attach a little bit away from the end of the top bar, it provides weight bearing assist
- Thigh Prompts- behind the chest prompt on the top bar
- Ankle Prompts- can be used on utility base and standard base both
- Tray- attach it to the pacer with a clamp
- Multi Positioning Saddle- attach under the upper frame.
- Guide Bar- attach it to any side of center section on the base frame
- After attaching required accessories, used can be positioned in the Pacer either in an anterior or posterior position
- The Gait Pacer can be cleaned with disinfectant wipes or solution of up to 10 percent bleach
- Steel hardware items are zinc or nickel plated or stainless steel
- The dimension of the Extra Large Gait Pacer are:
- Overall Width (Standard Base): 31-1/2 inches (80 cm)
- Overall Length (Standard Base): 39-3/4 inches (101 cm)
- Frame Height: 31 to 41 inches (Standard and Utility)
- Frame Weight: 22-1/2 lbs (10.2 kg)
SKU: K650
